RESIDENTIAL

POWERBEES PROVIDES AIR DUCT CLEANING, DRYER VENT CLEANING, MOLD TESTING AND MOLD REMOVAL TO A VARIETY OF COMMERCIAL CUSTOMERS.

New List Item Employees and customers alike are very concerned about the air they breathe. The awareness of health issues related to indoor air quality increases every year. PowerBees works with all types of commercial organizations, including software companies, banks, retail stores, restaurants, medical centers, pharmacies, libraries, museums, hotels, laundromats, pet stores and fitness centers. PowerBees has serviced many well known institutions e.g., Federal Express, Petco, the Harvard Art Museum, Rite Aid, Raddison, Sonesta, Molina Health Care, Caritas, Telefonica, Hyatt and Holiday Inn to name a few.

PowerBees provides Air Duct Cleaning services : Additionally, if you’ve not cleaned your air ducts in recent years, that’s a potential red flag with home buyers. PowerBees can provide duct cleaning services and clean the blower motors and AC coils as well. As part of the duct cleaning process, PowerBees’ technicians are careful to ensure that dust does not become a larger problem during the cleaning process. All registers and the underlying ductwork is hand vacuumed at the beginning of the process and the work area is protected. A Rotobrush® HEPA machine is used to clean the ductwork. This air duct cleaning equipment has powerful suction, agitation a hose than can be extended up to 70′ with a brush that spine to remove the dust and debris from the ductwork. All ductwork and trunk lines are cleaned. PowerBees technicians will clean the air handler, blower motor and coils if needed and procured as part of the service. Optionally the ductwork can be disinfected with a safe EPA registered disinfectant. Botanical disinfectants are an options.

PowerBees provides Dryer Vent Cleaning services for commercial Hotels, pet groomers, fitness centers laundromats all have dryer vents to handle the large volume of towels, bedding and clothes that need to be washed and dried throughout the day, every day of the year. The constant uses creates excessive dryer vent lint that can clog dryer vent exhausts. Insurance companies and safety inspectors require that these organizations maintain clean dryer vent exhausts. PowerBees provides dryer vent cleaning to address the needs of our expanding client base and will be happy address the needs of your institution.

When a PowerBees technician begins the dryer vent cleaning process, all precautions are taken to protect the work area. Upon arrival, PowerBees technicians inspect the dryer to ensure it turns on and is operational. The dryer is then unplugged and moved away from the wall. The dryer vent exhaust is then disconnected from the dryer and inspected. To clean the dryer vent, PowerBees uses a Rotobrush® Dryer Vent Cleaning system with powerful suction, long hoses, and separate cables that turn, capture and retrieve the lint from within the exhaust. After the dryer vent cleaning, the exhaust is reattached to the dryer. The airflow through the exhaust is tested to ensure proper operation. Finally, the PowerBees technicians clean the work area and move the dryers back into position. Don’t wait for a dryer vent fire. Call PowerBees today to schedule a dryer vent cleaning today!

PowerBees Provides Mold Removal in Commercial Buildings: When your employees and customers are concerned about prior water damage or a known mold problem within your building, the problem should be addressed. In today’s economy, competing for customers and retaining employees is a constant challenge. Mold problems only make these objectives more difficult. If there has been water damage or mold in your building there is a set of procedures that must be followed. PowerBees follows the process below to remove the mold:

Managed Airflow Environment: The affected area is contained to prevent cross-contamination while control the flow of air. HEPA Air Scrubbers are used to filter the air. Negative air is created to ensure that mold spores are not pulled into other unaffected areas in the building.

• A Managed Airflow Environment is established first. The affected area is contained to prevent cross-contamination while control the flow of air. HEPA Air Scrubbers are used to filter the air. Negative air is created to ensure that mold spores are not pulled into other unaffected areas in the building.
• Commercial dehumidifiers are used to control humidity and ensure structural drying. This is an important component of the mold abatement process.
• All building materials affected with mold and contents affected with mold are removed from the contained environment.
• All surfaces are HEPA Vacuumed and then treated with EPA Registered fungicides (antimicrobials). PowerBees will often suggest the use of Botanical antimicrobials to protect your employees and customers who may have chemical sensitivities.
• Framing and other building materials with mold that don’t have to be replaced are encapsulated with an EPA Registered Encapsulant.
• The last step in the process is having PowerBees clean the air ducts and air handler to ensure the ductwork is free of mold and mold spores.

PowerBees Provides Mold Testing in Commercial Buildings: If you’ve had water damage or have employees who complain that their health may be impacted by the air they’re breathing, PowerBees offers Mold Testing and Mold Inspections. The mold testing process will involve the use of indoor air samples, surface samples or a combination of both to understand if there is mold in the air or on surfaces and if the organism is active. Mold spores are microscopic and often can not be visibly identified. The only way to determine if spores are in the air is by collecting samples. A Mold Inspection conducted by PowerBees consists of the following:

PowerBees Provides Mold Testing in Commercial Buildings: If you’ve had water damage or have employees who complain that their health may be impacted by the air they’re breathing, PowerBees offers Mold Testing and Mold Inspections. The mold testing process will involve the use of indoor air samples, surface samples or a combination of both to understand if there is mold in the air or on surfaces and if the organism is active. Mold spores are microscopic and often can not be visibly identified. The only way to determine if spores are in the air is by collecting samples. A Mold Inspection conducted by PowerBees consists of the following: Item Link List Item 1

If the future occupants of that home, i.e., family members, have health issues, they may be even more susceptible to mold exposure. Once the home is purchased, there is little recourse for the home buyer. From a practical perspective, having a mold inspection before closing on a property may provide the prospective buyer with significant benefits, e.g. diagnosing the mold problem if it exists properly, resolving the mold problem prior to occupying the space and preventing an adverse impact on the occupants help.

PowerBees provides mold inspections for home buyers. Mold inspections for home buyers consist of the following: PowerBees will send a certified professional to the prospective home to conduct the mold inspection. The mold inspection consists of gathering an available history of prior water damage or mold and any other information about the prospective home buyer’s concerns related to the indoor air quality. PowerBees collects information about affected areas such at moisture readings, humidity, water staining, visible mold and possible causes of the mold problem in exists. The building’s exterior is also examined for potential issues that may contribute to water damage. PowerBees will take air samples and surface samples during the mold testing process, although in circumstances PowerBees may take only air samples or surface samples – there is not always visible mold. An outdoor baseline control sample is taken for comparative purposes. PowerBees seals and sends all samples to a third-party independent lab for processing. Samples can be rushed and available within 24 to 36 hours for an extra fee. When the results are available, PowerBees reviews all the data collected during the inspection and produces a detailed report that includes the following: investigation background, expressed concerns, visual observations, a summary of the results and a recommend detailed mold remediation protocol. If air quality is very problematic, additional testing may be suggested in those cases. PowerBees will also provide additional recommendations to prevent mold in the future and keep the property dry. Item Link List Item 1